Filter
Top Products
INSTALLATION
18
To connect Controller Keypad to the iPlayer 3:
1. Unplug the power cord from the iPlayer 3.
2. Select serial port 1 or 2.
3. Set the iPlayer 3 DIP switch to apply power to the selected
serial port. See iPlayer 3 DIP Switch Functions on page 22.
4. Choose the Controller Keypad power option:
– Power the Controller Keypad via the iPlayer 3 serial
connection
– Power the Controller Keypad via an external source
The Controller Keypad power source selection is configured
via wiring. Refer to the Controller Keypad instructions for
details.
5. Connect one end of the serial cable to the Controller Keypad.
A serial cable is supplied with the Controller Keypad.
Note: The maximum serial cable length is 50’ (15.24m).
6. Connect the other end of the serial cable to the selected
serial port on the iPlayer 3.
Connecting Contact Closure Switch Inputs
The iPlayer 3 accepts input from any standard contact closure
switch via serial port 1 or serial port 2. Note that an optional
Color Kinetics’ AuxBox is required for closure switch
connection.
Connecting the AuxBox to the iPlayer 3
1. Unplug the power cord from the iPlayer 3.
2. Select serial port 1 or 2.
3. Set the iPlayer 3 DIP switch to apply power to the selected
serial port. See iPlayer 3 DIP Switch Functions on page 22.