Filter
Top Products
CONFIGURATION MODE
33
Note: If you specify astronomical time, you also need to
specify both:
— The alarm hour and minute offset, which tells the iPlayer 3
when to fire a show with respect to a selected astronomical
event. For example, if you select
S
UNRISE
and offset =
+2
hours
+30
minutes, the alarm will fire two and one-half hours after
sunrise, and if you select
S
UNSET
and offset = -
1
hour, it will fire
one hour before sunset.
— Your latitude and longitude in order for the iPlayer 3 to
correctly calculate astronomical events. You do this via the
Setup Menu.
Note: The astronomical time alarm type does not
automatically make adjustments for daylight savings time.
You can configure up to 15 alarms. For example, to configure
alarm number 5 for every day at sunset:
1. Access Configuration Mode by pressing the right arrow
button on the iPlayer 3 faceplate.
2. Press the up or down arrow until the
A
LARM
submenu is
selected, and then press the right arrow.
3. Press the up or down arrow to alarm number 5.
4. At the
A
LARM
D
AYS
?
menu item, press the up or down arrow until
E
VERY
D
AY
is selected and then press the right arrow to
continue.
5. At the
A
LARM
T
YPE
?
menu item, press the up or down arrow until
A
STRONOMICAL
is selected, and then press the right arrow to
continue.
6. Select the
S
UNRISE
and the
S
UNRISE
OR
S
UNSET
?
menu item and then
press the right arrow to continue.
7. If you want to add an offset value (so that the show is
triggered a certain amount of time before or after sunrise or
sunset:
a. Enter an
A
LARM
H
OUR
O
FFSET
value and then press the right
arrow