Filter
Top Products
CONFIGURATION MODE
36
If the programming is successful, the light illuminates at full
intensity after a few seconds. If the programming is not
successful, the light does not illuminate.
8. At the
T
EST
DMX A
DDR
?
prompt, press the right arrow. The iPlayer
3 performs a non-interactive test of the light you specified in
step 6 by setting the specified DMX address to FULL ON and
all other DMX address to OFF.
Testing a DMX Address
To test the DMX address of light fixtures:
1. Access Configuration Mode by pressing the right arrow
button on the iPlayer 3 faceplate.
2. From the Configuration Mode main menu, select
S
ETUP
, and
then press the right arrow.
3. Select
T
EST
DMX A
DDR
, and then press the right arrow.
4. Specify the number of a light (1 through 170) you want to test.
The iPlayer3 sends test data to any lights which are set to
that address.
If the test is successful, the light(s) illuminate at full intensity. If
the programming is not successful, the light(s) do not
illuminate.
Info Menu
The Info Menu contains:
• iPlayer 3 firmware version information.
• Memory usage / available memory. For example,
104
K
/1024
K
indicates 104KB used out of 1024KB available.
• Astronomical clock data (for example, the time of sunrise for
the current day).