Filter
Top Products
CONFIGURATION MODE
34
b. Enter an
A
LARM
M
INUTE
O
FFSET
value and then press the right
arrow
8. Select a Trigger / Show number with which to associate the
alarm and then press the right arrow to continue.
9. Save your changes.
The alarm will set off the trigger number you associated in step
8.
Setup Menu
The Setup Menu contains configurable settings for:
• Expansion or serial ports. Devices attached to the two iPlayer
3 serial ports can trigger any of up to 255 shows stored on
the iPlayer 3. By default, an external device triggers shows
starting with show 1. However, you can use the iPlayer 3's
base show offset setting to specify a different starting show
number. When you specify an offset for the shows triggered
from a serial port, the sum of the offset and the number
specified by the external device triggers the shows played by
the iPlayer 3. For example, if you set an offset of 10 for one of
the serial ports and if the external device specifies show 2,
the iPlayer 3 will trigger show 12 (10 + 2). You specify the
offset at the iPlayer 3's
P
ORT
1
BASE
T
RIG
?
or
P
ORT
2
BASE
T
RIG
?
prompt.
• iPlayer 3 date and time. See Setting an Alarm on page 32.
• LCD screen appearance. You specify an integer from 0 to 10
to set the contrast and brightness, with 10 producing the
greatest brightness and contrast between the characters on
the screen and the background.
• Volume. You specify an integer from 0 to 3 to set the audible
volume of the iPlayer3's internal speaker, which produces a
beep with each button press. 3 is the loudest setting.
• Setting a DMX address. See Setting a DMX Address on page
35.