Filter
Top Products
RUN MODE
24
Alarm Playback
You can configure up to 15 alarms on the iPlayer 3. When using
alarms, you do not have to manually press a Preset button to set
off a trigger. Alarms automatically set off triggers based on
settings such as time of day or an astronomical event.
Switching Shows Without Using the Preset Buttons or
Controller Keypad
To switch shows without using the Preset buttons or Controller
Keypad, you can use alarms to automate show playback. See
Assigning Triggers on page 30 in the next chapter for iPlayer 3
trigger configuration information, or refer to the ColorPlay 3
User Guide for additional configuration instructions.
Light Show Brightness
Using the up and down buttons, you can set the overall
brightness level of lights in a show while it is being played. The
B
number displayed on the iPlayer 3 reflects the brightness level
you set between 0% and 100%.
Run Mode Display
The iPlayer 3 uses its LCD screen and LED indicator to provide
information during Run Mode.
Trigger Number Message
The LCD screen displays the current trigger (show) number
during playback.
Note: If you have not associated a trigger with a Preset
button, the LCD screen displays an
EMPTY
message when that
Preset button is pressed.