Seagate FR-A7AY Marine Battery User Manual


 
A-2
2. Injury Prevention
3. Additional Instructions
Also note the following points to prevent an accidental failure,
injury, electric shock, etc.
1) Transportation and mounting
2) Trial run
3) Usage
4) Maintenance, inspection and parts replacement
5) Disposal
6) General instruction
CAUTION
Apply only the voltage specified in the instruction manual to
each terminal. Otherwise, burst, damage, etc. may occur.
Ensure that the cables are connected to the correct terminals.
Otherwise, burst, damage, etc. may occur.
Always make sure that polarity is correct to prevent damage, etc.
Otherwise, burst, damage may occur.
While power is on or for some time after power-off, do not touch
the inverter as it is hot and you may get burnt.
CAUTION
Do not install or operate the plug-in option if it is damaged or
has parts missing.
Do not stand or rest heavy objects on the product.
Check that the mounting orientation is correct.
Prevent other conductive bodies such as screws and metal
fragments or other flammable substance such as oil from
entering the inverter.
CAUTION
Before starting operation, confirm and adjust the parameters.
A failure to do so may cause some machines to make
unexpected motions.
WARNING
Do not modify the equipment.
Do not perform parts removal which is not instructed in this
manual. Doing so may lead to fault or damage of the inverter.
CAUTION
When parameter clear or all parameter clear is performed,
reset the required parameters before starting operations.
Each parameter returns to the initial value.
For prevention of damage due to static electricity, touch
nearby metal before touching this product to eliminate static
electricity from your body.
CAUTION
Do not test the equipment with a megger (measure insulation
resistance).
CAUTION
Treat as industrial waste.
All illustrations given in this manual may have been drawn with
covers or safety guards removed to provide in-depth
description. Before starting operation of the product, always
return the covers and guards into original positions as specified
and operate the equipment in accordance with the manual.