Filter
Top Products
Simrad AP26 and AP27 Autopilots
92 20221586B
Rudder Deadband
The rudder deadband function
is adaptive and is continuously
operative. It prevents the
rudder from hunting and the
adaptive function optimizes the
deadband to the speed of the
boat and the pressure on the
rudder.
If the auto-setting does not perform properly due to high inertia
from the wheel or a loose steering gear, it can be adjusted
manually.
Adjust the Rudder deadband by rotating the course knob. Find
the lowest possible value that will prevent the rudder from
hunting. A wide deadband will cause inaccurate steering. It is
recommended to check rudder stability and accuracy in FU-
mode when the boat is moving to get pressure on the rudder.
Range: AUTO, 0.1° to 4.0° in 0.1° increments.
Default: AUTO.
Proceed to the next menu item by pressing the STBD button.
Wind setup
Wind setup is only available if ‘Boat type’ is set to ‘Sail’ in the
Installation/Dockside menu.
Wind setup has two levels:
NORMAL and RACING. The
RACING level will give access
to more wind setup items to
achieve optimal performance
when sailing.
Additional setup items also become available in the User setup
and the Quick setup menus.
Range: NORMAL and RACING
Default: NORMAL