Filter
Top Products
Installation Manual
20220737B
15
3.6 100/110V AC Mains
The Gyrocompass is pre-wired for connection to 220V AC
Mains. If the Gyrocompass is connected to 100/110V AC Mains
the following jumpers must be connected in the Control Box.
Refer to Figure 3-1.
1. On the Power PCB connect the Jumper J1.
2. On the Term PCB connect the Jumper J3.
J3
J1
POWER PCB
TERM PCB
OPT PCB
CONTROL BOX
Make a jumper at
J1 and J3 when
connecting to
100/110V AC
Figure 3-1 Jumper connection for 100/110V AC Mains supply