Filter
Top Products
Installation Manual
20220737B
7
68-2-2 ref. EN 60945
68-2-6 ref. EN 60945
68-2-27 Not tested.
68-2-30 ref. EN 60945
68-2-32 Not applicable ref. EN 60945
68-2-52 ref. EN 60945
157-1 Not tested
Note ! The equipment is approved according to the European Marine
Directive 96/98/EC (Wheel mark) which incorporates the European
Norm EN 60945 (IEC 945 3rd revision).
2.2 RGC12 Control Box
Physical Dimensions
Height:.........................................................................570 mm (22,4”)
Width:..........................................................................334 mm (13,1”)
Depth:............................................................................182 mm (7,2”)
Weight:......................................................................16,5 kg (36,3 lbs)
Power
Voltage input:................. 100/110/220 VAC, single phase, 50/60 Hz
Power consumption: .............................................140 VA (Starting)
70 VA (Running)
Emergency power supply:.................................................... 24 VDC
140 W (Starting)
70 W (Running)
General specifications
Repeater type: .................. Step-motor type (24VDC 1 step = 1/6°)
Number of repeater ports:................................................................9
(also possible to connect load of max
24V DC 8.5A)
Follow up rate (master compass):.................. 30°/sec. (360°/12 sec.)
Angular freedom of gimbal: ........................±45° for roll and pitch
Latitude error correction:....................................Automatic 0° ∼ 70°