Filter
Top Products
Installation Manual
20220737B
25
Electrical Installation
Caution ! Application of any voltage supplies other than those stipulated in
the product specification may cause damage to the repeater.
DR75 are connected to the ships cabling by a supplied pre-
wired D-type connector and a 2.5 m (8’) six core screened cable.
The D-type connector plugs directly into the repeater to make
maintenance and servicing easier. The cable is connected to the
Ship’s Data Cable. It is recommended that a suitable junction
box (not supplied), is used for this purpose.
Connect ships core to repeater cores according to the diagram
below.
Figure 5-1 DR75 connection diagram