Sony PCS-1P Marine Radio User Manual


 
2-16
PCS-1/1P
Dial
Multipoint
General
ISDN
Information
Answer
Audio
Administrator
LAN
Status
Setup
Save Phone Book
Load Phone Book
Clear Phone Book
Save Application
Save Call Log
Save System Log
Save Setup
Load Setup
Clear Setup
Load Application
System Reset
Service
Command
Save Cancel
2-6. Service Mode
In the service menu of PCS-1/1P, data can be saved in the
a commercial Memory Stick or read from a Memory Stick
(overwritten in the current data).
1. Continuously press the menu button of a remote
controller and display a Setup menu including
Dial and Answer.
2. Press the button of a remote controller and select
Dial. Enter 7 and 2 sequentially using the
numeric key of a remote controller without pressing
the ENTER button and display the service menu.
n
To cancel the service mode, select Cancel using , , ,
and buttons of a remote controller and press the ENTER
button, or press the return button of a remote controller.
The current display returns to a set menu.
For saving of a phone book, loading of a phone
book, saving of application, saving of a
communication log, saving of a system log,
saving of setting, and loading of setting
1. Display a service menu.
2. Insert the Memory Stick, in which data can be written
or in which the required contents have been already
recorded, into a Memory Stick slot.
3. Select the function, which you want to execute, using
, , , and buttons of a remote controller and
press the ENTER button.
4. A confirmation message on whether to execute the
function is displayed. To execute, select OK and
press the ENTER button. To cancel execution, select
Cancel and press the ENTER button.
5. After execution or cancellation, the current display
returns to a service menu.
6. Push in the Memory Stick once and take out it.
For erasure of a phone book and setup
1. Display a service menu.
2. Select the function, which you want to execute, using
, , , and buttons of a remote controller and
press the ENTER button
3. A confirmation message on whether to execute the
function is displayed. To execute, select OK and
press the ENTER button. To cancel execution, select
Cancel and press the ENTER button.
4. After execution or cancellation, the current display
returns to a service menu.
For system reset
1. Display a service menu.
2. Select System reset using , , , and buttons of
a remote controller and press the ENTER button
3. A confirmation message on whether to execute is
displayed. To execute, select OK and press the
ENTER button. To cancel execution, select Cancel
and press the ENTER button.
4. After execution, a launcher menu is displayed. After
cancellation, the current display returns to a service
menu.