Filter
Top Products
CP180 / CP180i Page 45
7.2 MARKS/WAYPOINTS LIST
The MARKS/WPTS List shows all the Marks and Waypoints that have been stored into the
GPS chart plotter. This page also allows you to:
ICON Allows sorting by icon type
FIND Searches through the Marks or Waypoints to find a point by name using the ShuttlePoint knob
LOCATE Shows the position of a Mark or Waypoint on the Chart page
EDIT Allows you to edit a previous stored Mark or Waypoint
NEW MARK Allows entering in Marks, editing icon type and position
MODE This selection controls how the Marks or Waypoints are shown on the Chart page. Selections are:
a. SHOW - icon and name are shown
b. ICON - only icon (no name) is shown
c. HIDE - Mark or Waypoint is hidden
d. SHOW ALL - All Marks or Waypoints are shown
e. ICON ALL - All Icons are shown without name
f. HIDE ALL - All Marks or Waypoints are hidden
DELETE Opens a window with two options: "DELETE SELECTED" for deleting the selected point and
"DELETE ALL" for deleting all stored points.
SORT Sorts the name of the Mark or Waypoint in ascending or descending order
SEND Sends the stored points to a external device (PC) capable of listening to NMEA WPL and RTE
sentences.
RECEIVE When selected, receives points from an external device (PC) that is capable of sending NMEA
WPL sentence.
NOTE
The SEND and RECEIVE functions are usually used by navigation programs running on a Personal
Computer for example Nobeltech.
Figure 7.2 - Marks/Waypoints List
7.3 CREATING A NEW MARK WITH THE MARKS/WAYPOINTS LIST
NOTE
This function is very useful if you have a list of Marks that you want to enter into the GPS chart plotter.
1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT].
2. Move the ShuttlePoint knob to highlight
MARKS/WPTS and press [ENT].
3. The MARKS/WAYPOINTS List page will be shown (see previous Figure).
4. To create a New Mark, move the ShuttlePoint knob to the right to highlight
NEW MARK
and press [ENT].
5. Press [ENT] to change to show the Icon popup window.
6. Move the ShuttlePoint knob to highlight the desired Icon and press [ENT].
7. Move the ShuttlePoint knob to the right to select the Mark name. Press [ENT] and the
first digit in the name will be highlighted.