Page 11 of 38
2 Safety
2-1 Work Rules
The installation, operation, and maintenance of this
equipment must be conducted in accordance with all appli-
cable work and safety codes for the installation location. This
may include, but is not limited to OSHA, NEC, CSA, SPI,
and any other local, national, and international regulations.
; Read and follow these operating instructions when
installing, operating, and maintaining this equipment. If
the instructions become damaged or unreadable,
additional copies are available from Sterling.
; Only qualified personnel familiar with this equipment
should work with this system.
; Work only with approved tools and devices.
; Disconnect and lock out power while working on this
equipment.
2-2 Tools and Equipment Needed
These tools and equipment are necessary for installation:
; Hand tools.
; Wire, conduit, and fittings for wiring runs.
; Anchor bolts with nuts and washers or red head-type
anchors.
2-3 Safety Considerations
The terms NOTICE, CAUTION, WARNING, and DANGER
have specific meanings in this manual.
NOTICE is used to indicate a statement of company policy
directly or indirectly related to the safety of personnel or
protection of property.
CAUTION indicates a potentially hazardous situation which,
if not avoided, may result in minor injury.
WARNING indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.