Topcon GPT-2006 Marine Instruments User Manual


 
9 MEMORY MANAGER MODE
9-8
9.3.1 Rename a File
An existing le in internal memory can be renamed.
9.3.2 Searching Data in a File
An existing le in internal memory can be searched.
Operating procedure Operation Display
1 Press the [F3](FILE MAINTAN.) key from the
Memory manager menu 1/3.
[F3]
2 Select a le by pressing [ ]or[ ] key.
[ ]or[ ]
3 Press the [F1](REN) key.
[F1]
4 Enter new le name.
Press the [F4](ENT) key. *1)
Enter FN
[F4]
*1) Refer to Section 2.6 “How to Enter Alphanumeric characters”.
Existing le name can not be available.
To return to the FILE MAINTAN. Menu , press the [ESC] key.
Operating procedure Operation Display
1 Press the [F3](FILE MAINTAN.) key from the
Memory manager menu 1/3.
[F3]
2 Select a le to search by pressing [ ]or[ ] key.
[ ]or[ ]
3 Press the [F2](SRCH) key.
[F2]
4 Select searching method by pressing the [F1] to
[F3] key. *1)
[F1] to [F3]
*1) Because procedures from next are same as procedures of Section 9.2 "Searching Data", refer to
Section 9.2 “Searching Data”
To return to the FILE MAINTAN. Menu , press the [ESC] key.
MEASD1 /M0123
COORD1 /C0056
REN SRCH DEL –––
MEASD1 /M0123
COORD1 /C0056
COORD2 /C0098
REN SRCH DEL –––
MEASD1 /M0123
=COORD1 /C0056
COORD1 /C0098
1234 5678 90.– [ENT]
MEASD1 /M0123
COORD5 /C0056
COORD1 /C0098
REN SRCH DEL –––
MEASD1 /M0123
COORD1 /C0056
REN SRCH DEL –––
MEASD1 /M0123
COORD1 /C0056
COORD2 /C0098
REN SRCH DEL –––
SEARCH [COORD1 ]
F1:FIRST DATA
F2:LAST DATA
F3:PT# DATA