Topcon GPT-2006 Marine Instruments User Manual


 
7 DATA COLLECTION
7-3
7.1 Preparation
7.1.1 Selecting a File for Data Collection
A le used by data collection mode must be selected at rst.
Select a le before beginning data collection mode because selection screen of a le is displayed. And
a selection from data collection menu is possible in the mode.
Operating procedure Operation Display
1 Press [F1](DATA COLLECT) key from menu 1/3.
[F1]
2 Press [F2](LIST) key to display the list of le. *1)
[F2]
3 Scroll le list by pressing [ ] or [ ] key and
select a le to use. *2),3)
[] or [ ]
4 Press [F4](ENTER) key.
The le will be set and data collect 1/2 menu will
be shown.
[F4]
*1) If you want to make a new le or input le name directly, press [F1](INPUT) key and enter a le name.
*2) When a le has been selected already, '*' mark is indicated on left of current le name.
*3) Data in a le shown with arrow can be searched by pressing [F2](SRCH) key.
It is possible to select a le from DATA COLLECT 2/2 menu in the
same way.
MENU 1/3
F1:DATA COLLECT
F2:LAYOUT
F3:MEMORY MGR. P
SELECT A FILE
FN:_________
INPUT LIST ––– ENTER
AMIDATA /M0123
*HILDATA /M0345
TOPDATA /M0789
––– SRCH ––– ENTER
TOPDATA /M0789
RAPDATA /M0564
SATDATA /M0456
––– SRCH ––– ENTER
DATA COLLECT 1/2
F1:OCC.PT# INPUT
F2:BACKSIGHT
F3:FS/SS P
DATA COLLECT 2/2
F1:SELECT A FILE
F2:PCODE INPUT
F3:CONFIG. P