Filter
Top Products
1-4
1 NOMENCLATURE AND FUNCTIONS
1.3 Operating Key
1.4 Function Key (Soft Key)
The Soft Key message is displayed at the bottom line of display. The functions are according to the
displayed message.
Keys Name of Key Function
Coordinate
meas.key
Coordinate measurement mode
Distance meas.key Distance measurement mode.
ANG Angle meas.key Angle measurement mode
MENU Menu key
Switches menu mode and normal mode. To set application measurements
and adjust in the menu mode.
ESC Escape key
● Returning to the measurement mode or previous layer mode from the
mode set.
● To be DATA COLLECTION mode or LAYOUT mode directly from the
normal measurement mode.
● It is also possible to use as Record key in normal measurement mode.
To select function of Escape key, see Chapter 16 “SELECTING MODE”
.
POWER Power source key ON/OFF of power source
F1–F4
Soft key
( Function key)
Responds to the message displayed.
Angle measurement mode Distance measurement mode
Coordinates measurement mode
H-BZ R/L CMPS P3
↓
TILT REP V% P2
↓
V: 90°10'20"
HR:120°30'40"
0SET HOLD HSET P1
↓
[F1] [F2] [F3] [F4]
Soft keys
--- m/f/i --- P3
↓
OFSET S.O S/A P2
↓
HR:120°30'40"
HD*[r] <<m
VD: m
MEAS MODE NP/P P1
↓
OFSET m/f/i S/A P3
↓
R.HT INSHT OCC P2
↓
N: 123.456 m
E: 34.567 m
Z: 78.912 m
MEAS MODE NP/P P1
↓