Filter
Top Products
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
INTERFACE BOARD REMOVAL
4. Remove one M2.5x4 flat head black screw
securing the system board.
5. Lift out the system board.
1. Disconnect the touchpad cable from PJ15, the
interface cable from PJ10, the sub LCD cable from
PJ13 and the sub LCD power harness from PJ12.
2. Remove one M2x4 brass screw securing the
interface board.
3. Lift out the interface board.
Interface
cable
Touchpad
cable
Sub LCD power harness
Sub LCD cable
M2x4
brass
screw
Interface
board
Satellite
TM
PJ10
PJ13
PJ12
PJ15
SYSTEM BOARD REMOVAL
1. Disconnect the DC-IN harness from PJ8800 on the
system board and remove it.
2. Disconnect the sound cable from PJ119 on the
system board.
3. Disconnect the battery harness from PJ8820 and
PJ8821 on the system board.
DC-IN
harness
PJ8800
Battery harness
PJ8820
PJ8821
Sound
cable
PJ119
M2.5x4 flat head black screw
TOUCHPAD BOARD REMOVAL
1. Disconnect the touchpad cable from the touchpad
PCB.
2. Remove four M2x4 brass screws securing the
touchpad assembly.
3. Lift out the touchpad PCB.
M2x4brass screws
Touchpad
PCB
Touchpad
cable