Filter
Top Products
MODEM BOARD REMOVAL
MODEM BOARD REMOVAL
MINI PCI CARD REMOVAL
1. Remove one M2x3 black screw securing the
modem slot cover.
2. Insert your finger nail or the case separator into the
notched side of the cover and lift up to release the
latch securing the modem slot cover.
TOSHIBA
Tough Enough for Today’s World
1. Open the display panel.
2. Remove the keyboard holder at the top of the
keyboard.
KEYBOARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
3. Disconnect the black and white coax cables from
the mini PCI wireless LAN card.
4. Gently press out the Mini PCI slot clips and pull the
Mini PCI wireless LAN card out of the connector on
a 30 degree angle.
NOTE: The mini PCI wireless LAN card is optional
for the 5100 series.
3. Disconnect the MJ harness from JP1 on the modem
board.
4. Remove two M2x3 black screws securing the
modem board.
5. Lift up the modem board to disconnect it from the
system board.
Latch
Keyboard holder
Satellite
TM
Wireless LAN card
PCI clips
Black/white
mini coax
Modem slot cover
M2x3 black flat head screws
M2x3 black screws
Modem
MJ Harness