Filter
Top Products
TOSHIBA
Tough Enough for Today’s World
TOP COVER REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
M2x6 brass screws
M2x3 black screw
CD-R/W/DVD-ROM side bracket
CD-R/W/DVD-ROM bracket
CD-R/W/DVD-ROM connector
CD-R/W/DVD-ROM drive
2. Remove one M2x3 black screw securing the side
bracket and lift out the bracket.
3. Remove two M2x6 brass screws securing the CD-R/W/
DVD-ROM connector and the bracket.
4. Remove the connector and the bracket.
8. Disconnect the LCD/FL cable from PJ203 and PJ204
on the video board.
9. Disconnect the mini coax cable frrom the
HDD/battery board.
10. Disconnect the interface cable and the CD control/
touch pad cable from PJ124 and PJ114 on the
system board. Lift out the top cover assembly.
Membrane
switch
PJ103
Satellite
TM
CD-R/W/DVD-ROM DRIVE REMOVAL
1. Slide the CD-R/W/DVD-ROM drive to the right to
disconnect it from PJ106 on the system board.
4. Turn the computer right side up and open the LCD panel.
5. Remove one M2x4 brass screw securing the KB
plate and lift out the KB plate.
6. Remove two M2.5x16 black screws and two M2x6
brass screws securing the top cover.
7. Disconnect the power/internet/in-touch/cover sensor
membrane switch from PJ103, the left and right speaker
cables from PJ120/PJ121 on the system board.
KB plate
assembly
M2x4 brass screw
M2x6 brass screws
M2.5x16
black
screws
PJ120
PJ121
Left/right
speaker cables
Interface cable
CD control/touchpad cable
LCD/FL cable
PJ203
PJ124
PJ114
PJ204
Mini coax cable
PJ106
CD-R/W/DV-ROM drive