Filter
Top Products
TOSHIBA
Tough Enough for Today’s World
SOUND BOARD REMOVAL
1. Remove two M2x4 black flat head screws securing
the sound board.
2. Lift out the sound board and disconnect the sound
cable (FMZFL1) from PJ1100 on the sound board.
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
RTC REMOVAL
1. Remove the glass tapes securing the battery harness
and RTC battery.
2. Disconnect the RTC battery harness from PJ8752
on the system board.
3. Lift the RTC battery out of the slot.
Satellite
TM
SPEAKER(WOOFER) REMOVAL
1. Peel off the glass tape securing the woofer harness.
2. Disconnect the woofer harness from PJ1106 on the
sound board.
3. Lift out the speaker(woofer).
woofer harness
Glass tape
Speaker
(woofer)
PJ1106
M2.5x4 black flat head screws
Sound
board
Sound
cable
BATTERY BOARD REMOVAL
1. Remove one hex screw securing the battery board.
2. Remove two M2x6 brass screws securing the cpad
cover and lift out the cover.
3. Disconnect the two battery board harnesses from
PJ1000 and PJ10001 on the battery board.
4. Lift out the battery board assembly.
M2x6
brass
screws
Battery harnesses
Cpad cover
Hex screw
RTC battery
PJ8752
RTC battery harness