Filter
Top Products
User’s Manual 3-14
Hardware, Utilities and Options
Optional devices
Optional devices can expand the computer's capabilities and its versatility.
This section describes the connection or installation of the following
devices:
Cards/memory
■ ExpressCard/PC Card
■ Memory media slot
■ Secure Digital™ (SD) Card (SD memory card, SDHC memory card,
SDXC memory card, miniSD Card, microSD Card)
■ Memory Stick (Memory Stick, Memory Stick PRO, Memory Stick
Duo, Memory Stick PRO Duo, Memory Stick Micro)
■ xD picture card
■ MultiMediaCard
■ Additional memory module
Peripheral devices
■ External monitor
■ eSATA
■ Serial port
Other
■ Security lock
ExpressCard
The computer may be equipped with a single ExpressCard slot into which
any ExpressCard device that meets industry standards, either
manufactured by TOSHIBA or another vendor, can be installed. The slot
supports hot plug connection and utilizes the PCI Express interface that
supports the reading and writing of data at a theoretical maximum rate of
2.5Gbps.
To enable TPM through the BIOS setup:
1. Turn on the computer while pressing the F2 key. When the TOSHIBA
Leading Innovation >>> screen appears, release the F2 key.
2. Set the TPM in the Security tab to Enabled.
3. Press the F10 key.
4. Press the Y key to accept the changes. The computer will restart.
In order to change the TPM setting when the Hide TPM setting is currently
set to Yes, switch the Hide TPM setting from Yes to No.