Filter
Top Products
E6581090
K-7
11
• Operation panel parameters
Title
Communication
No.
Function Unit
Minimum setting
unit Panel/
Communication
Adjustment range
Default
setting
User
setting
Reference
H 0700 Prohibition of change
parameter settings
--0:Permitted (EOQF,
HOQF cannot be
changed during
operation.)
1:Prohibited
2:Permitted (EOQF,
HOQF also can be
changed during
operation)
3:Prohibited (except for
panel frequency
setting.)
4:0 + panel emergency
stop prohibited
5:1 + panel emergency
stop prohibited
6:2 + panel emergency
stop prohibited
7:3 + panel emergency
stop prohibited
06.15.1
H 0701 Unit selection - - 0:0%, Hz (no change)
1:% to A/V
2:Free unit selection
enabled (H)
3:% to A/V, Free unit
selection enabled
(H)
06.15.2
H 0702 Frequency units
selection
-0.01/0.01 0.01-200.0 1.00 6.15.2
H 0710 Selection of monitor
display selection
--0:Operation frequency
(Hz/free unit)
1:Frequency
command (Hz/free
unit)
2:Output current (%/A)
06.15.3
• Communication parameters
Title
Communication
No.
Function Unit
Minimum setting
unit Panel/
Communication
Adjustment range
Default
setting
User
setting
Reference
H
0800 Communication baud
rate
--0:1200bps
1:2400bps
2:4800bps
3:9600bps
4:19200bps
36.16
H 0801 Parity - - 0:NON (non-parity)
1:EVEN (even parity)
2:ODD (odd parity)
16.16
H 0802 Inverter number - 1 0-99 0 6.16
H 0803 Communication error
trip time
s1/10 (Disabled),
1 - 100 (s)
06.16
H 0880 Free notes - 1
0～65535 *
06.16
*Adjustment range of the above mention can set by the computer on the network.
The operation panel can set to the maximum 9999.
• Factory setting parameter
Title
Communication
No.
Function Unit
Minimum setting
unit Panel/
Communication
Adjustment range
Default
setting
User
setting
Reference
H 0990 For factory setting - - - 0 -
*This function is effective after software version V110.
*