Trimline t523 Waterskis User Manual


 
27
TT
TT
AA
AA
KK
KK
II
II
NN
NN
GG
GG
CC
CC
AA
AA
RR
RR
EE
EE
OO
OO
FF
FF
YY
YY
OO
OO
UU
UU
RR
RR
TT
TT
RR
RR
EE
EE
AA
AA
DD
DD
MM
MM
II
II
LL
LL
LL
LL
CLEANING
General cleaning of the treadmill will prolong the life of the treadmill and improve performance.
Keep the unit clean by dusting regularly. Be sure to dust the exposed part of the deck on either side of the
walking belt and also the side rails.
For best performance, we recommend your treadmill be placed on a treadmill mat. Along with reducing
noise, a treadmill mat will help to keep dust debris away from your treadmill’s critical components.
Clean the top of the belt with a wet, soapy cloth. Be careful to keep liquid away from inside the motorized
treadmill frame or underneath the belt.
Dust and lint can accumulate under the motor cover and should be vacuumed out at least once a year. To do
so, FIRST UNPLUG THE UNIT. Then, remove the motor cover and carefully vacuum under the cover and
around the machinery. REPLACE THE COVER BEFORE PLUGGING THE UNIT BACK INTO THE
OUTLET.
WALKING BELT AND DECK LUBRICATION
This treadmill is equipped with a pre-lubricated deck and belt system. The deck and belt friction may affect
the function and life of your treadmill; we recommend periodic lubrication. We also recommend a periodic
inspection of the deck surface under the walking belt. If the deck appears worn, contact our
service department at
800-NAUTILUS (800-628-8458) or e-mail cstech@nautilus.com.
Use the following timetable as a guide to lubricate the deck:
• Light user (less than 3 hours/week) annually
• Medium user (3-5 hours/week) every six months
• Heavy user (more than 5 hours/week) every three months
We recommend that you use the following:
• Lube-N-Walk™ Treadmill Lubrication Kit, available from JAD Fitness, Inc. (
800-877-3486 or
www.jadfitness.com) or your local specialty fitness dealer
• NAPA
®
8300 Silicone Spray, available at most NAPA
®
Auto Parts stores
WARNING
W A R N I N G
A T T E N T I O N
D A N G E R
C A U T I O N
ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET
BEFORE CLEANING, LUBRICATING, OR SERVICING THE UNIT.