Filter
Top Products
E-6 Uniden MHS135DSC Radio Owner’s Manual
Menu Option What it does
System You can set system-wide features using the following settings:
- Lamp Adjust. This setting adjusts the brighness of the backlighting.
- Contrast/RVS. You can adjust the brightness of the screen contrast higher or lower.
Once you get to the bottom limit of the contrast, selecting it again reverses the
contrasts.
- Temperature. Your system can measure water temperature. This option lets you
display the temperature in Farenheit or Celsius.
Call Menu
Press and hold MENU/CALL to
set the technical requirements for DSC function
operations through the
Call
menus. The menus are:
Menu Option What it does
Individual Sends an individual call to an individual station.
Group Sends a call to a group.
All Ships Sends
URGENCY
or
SAFETY
message to all ships.
POS Request Requests the position of an individual vessel.
Position Send Transmits your position to a vessel that was programmed into the DIRECTORY.
Test Sends a test call.
Standby Places the radio in an unattended mode.
Receive Log Displays a list of all received calls to the radio. The MHS135DSC stores log data
for 10 distress calls and 50 other calls.
DSC Setup Allows the user to set up Digital Selective Calling (DSC) service.
GPS/MEM
The
Favorite
menu lets you save and name sets of GPS coordinates so you can return
to that location again. You can recall the saved GPS coordinates, too. Congure the
GPS module through the
GPS Setup
menu. See page E-26 for details.
Your radio has three main operation modes: Normal, Scan, and Weather.
Mode What it does Use it when you want to... To turn it on/off
Normal
Monitors a single marine channel
and lets you talk on that channel.
Monitor a channel or talk to
another radio.
(default mode)
Scan
Monitors all the channels you save
into memory.
Check a small group of regularly-
used channels for trafc.
Press and hold
CLR/
SCAN
for 2 sec.
Weather
Monitors the selected NOAA
weather channel.
Hear the current or forecasted
weather.
Press
WX/SOS