Filter
Top Products
E-19Uniden MHS135DSC Radio Owner’s Manual
Calling a single staon (Individual Call)
To call a single station with DSC, follow these steps:
1. Press and hold
MENU/CALL to display the
Call
menu.
2. Select
Individual
.
3. The radio displays the names listed in your directory; use
CHANNEL UP and
CHANNEL DOWN to choose the directory entry you want to call and press
ENTER-H/M/L.
If you want to call a station that is not in your directory, select
Manual
. The radio
prompts you to enter the MMSI number you want to call. Enter the MMSI number
the same way you enter directory entries (see page 22) Enter all nine digits and
press ENTER-H/M/L.
4. The radio prompts you to select a response channel. Use
CHANNEL UP and
CHANNEL DOWN to scroll through the available channels. When you reach the
channel you want to use for a response, press the ENTER-H/M/L button.
5. The radio displays the MMSI number you are about to call and asks you to
conrm. If you want to call the displayed MMSI number, select
Send (press
ENTER-H/M/L). To cancel the call, select
Exit
(press CLR/SCAN).
All ships call
Group
call
Individual
call
All ships call