E-16 Uniden MHS135DSC Radio Owner’s Manual
arrow (GPS/MEM) to move the cursor to the next space. Press the left arrow (WX/SOS)
to back up.
When using the
CHANNEL UP and CHANNEL DOWN keys to enter a name, the
alphabetic and numeric characters display in the following order:
x Capital letters (A through Z)
x Lower-case letters (a through z)
x Punctuation (/ ‘ + -)
x Numbers (0 through 9)
x One blank space
Entering Your User MMSI Number
#
1. When you power up your radio for the rst time, it displays
MMSI Not Entered
and
then displays a marine mode screen. Press and hold MENU/CALL; the
Enter User
MMSI
screen displays.
2. Press
ENTER-H/M/L. The
User MMSI
screen displays.
3. Enter the MMSI number as described previously to scroll through the numbers.
When the ninth digit is entered, the radio asks if you want to save the number and
conrm it. Press
ENTER-H/M/L to save it.
4. Before saving the number, the radio displays the message
Conrm number! User
MMSI data is Permanent!
At this point you can edit the number (press MENU/
CALL), save the number (press ENTER-H/M/L), or return to the marine mode
screen (press CLR/SCAN),
Entering a group MMSI number
You can change the group MMSI number as often as you want. The rst digit of a group
MMSI is xed at “0.” Follow the steps below to enter a group MMSI number into the
radio:
1. Press and hold
MENU/CALL to display the
Call
Menu.
2. Scroll to
DSC Setup
and press ENTER-H/M/L.The
DSC Setup
menu displays.
3. Scroll to
Group MMSI
and press ENTER-H/M/L. The
Group MMSI
screen displays.
4. Group MMSI numbers always start with a 0, so that digit is already entered for
you. Enter the MMSI number as described previously. When the ninth digit is
correct, press
ENTER-H/M/L. The radio asks you to conrm.
5. To save this MMSI number, press
ENTER-H/M/L. To cancel this MMSI number,
press CLR/SCAN.
0________
Use the up and down arrows
to adjust each of the eight
digits in turn.
16
Group MMSI
Back
[MENU]
Exit
[CLR]
Save
[ENT]
USA
DSC Setup
Press and hold
Group MMSI