Filter
Top Products
Choosing a Priority Channel
The starting channel, when Group Scanning is initiated, is always the Priority Channel.
Changing the PRI channel setting while scanning,
ego PRI Channel is CH17 (476.825 MHz)
a. press"", to select a higher channel (scanning pauses)
- or -
GS
S BCN
"I 75.8SGMHzPR,
,,-,
,C,
b. press"', to select a lower channel
GS
S SCN
"I 75.8GGMHzPRI
, ,-
, ,-
-'
Drop-Out Delay
While scanning, the UH-100 stops at a busy channel and receives a transmission.
When the received signal is over, the unit will wait for three seconds for the return of
the signal, otherwise, the radio resumes scanning.
15