Filter
Top Products
Tone Squelch Scanning
You may wish to limit your scanning activities so the UH-100 will only scan the channels
you have pre-arranged to use with your SELCALL family. These are the channels you
have programmed as TSQ or quiet mode.
Tone Squelch Scanning applies this function.
To activate this feature firstly initiate SCAN.
MEM "=1,-,
BCN - ."".
,
"
,
- -
e
CH
@
~ ~
~ ~~_.
Then press SCRAMBLEITSQ.
TSQ ,-, ,-,
BCN ,- ,"""
~,-'
e
CH
@
~ ~
~~~.
When a call is received the unit will pause scanning and an audible alarm is emitted.
If left unanswered the radio will resume Tone Squelch scanning. The UH-100 can be
programmed to deactivate scan automatically when a selective call is received. Please
refer to the Selcall Advance Programming Section.
To deactivate Tone Squelch Scanning, simply press SCN key.
31