Filter
Top Products
Selective Calling
When you listen to UHF CB you will hear all the conversations going on, which can
become annoying at times. Ideally you need a system that alerts you when the signal
is from someone you wish to communicate with.
You want your radio to be SELECTIVE about the people you talk to!
That's what the Uniden UH-100 offers, with SELECTIVE CALLING, commonly known
as SELCALL. It lets you know that the people you want to talk to are calling.
To achieve this each radio must have a SELCALL ID.
This SELCALL ID acts as a "Phone Number" and your radio as a "Mobile Phone".
Everybody in your group must have a different "Phone Number" that only your group
members should know. If one of your members dials your "Phone Number", when
reached successfully, your "Mobile Phone" of course will "Ring", and your caller will
hear a "Ringing Tone".
This "Ring" is actually a CALL Alarm, and the "Ringing Tone" is an Acknowledgment
Tone. Any user tuned to your UHF CB channel will hear the conversation.
UH-100 Selcall Features
. UserProgrammable UH-100 SELCALL ID
. 10Transmit SELCALLID Memory
. Full ID Display
. Caller Identification
. Acknowledgment Tone
. Auto Caller ID Load and Reply(ReturnCall)
. Last IDResend
. Tone Squelched ChannelScanning
. All SELCALLParametersare User Programmable
. ReceiverQuieting (ToneSquelched Mode)
Note: You only give your Selcall code to people who you want to be able to get in
touch with. Likewise you need to know their Selcall codes to be able to contact
them. Other users in your SELCALL family may not be using Uniden radios, the
Uniden UH-100 can be programmed to have full compatibility with other brands.
Please read the selcall advance programing section of this manual for guidance.
The Audio scrambler and the SELCALL functions cannot be operated
simultaneously.
20