Filter
Top Products
10
4 Installation
Installing the XPower 450 requires five steps:
1. Choosing a location
2. Mounting the inverter
3. Connecting DC power to the inverter using either:
• the cigarette lighter plug (if supplied).
• DC cable clips and a battery (if supplied).
• hardwiring the inverter to the battery.
4. Connecting the chassis ground
5. Testing the AC outlet
Choosing a location
For best performance, choose a location that is:
• Dry Do not expose the inverter to water drip or spray.
• Cool Operate the inverter in ambient temperatures between 0° C
and 40° C (32° F and 100° F). Keep it away from heating vents and
direct sunlight.
• Well ventilated For proper cooling, allow at least 5 cm (2 in.) of
clearance around the inverter.
• Clean and free of dust and dirt Choose a location that is free of
any debris that could get into the inverter.
XPower450.book Page 10 Tuesday, September 7, 2010 12:39 PM