Filter
Top Products
Trademarks
Xantrex and Xpower are registered trademarks of Schneider Electric Services International
sprl, registered in the United States and other countries.
Other trademarks, registered trademarks, and product names are the property of their
respective owners and are used herein for identification purposes only.
Notice of Copyright
XPower Inverter 450 Owner’s Guide Copyright © August 2010. Xantrex Technology USA Inc.
All rights reserved. No part of this document may be reproduced in any form or disclosed to
third parties without the express written consent of: Xantrex Technology USA Inc., 541 Roske
Drive, Suite A. Elkhart, Indiana, USA 46516. Xantrex Technology USA Inc. reserves the right
to revise this document and to periodically make changes to the content hereof without
obligation or organization of such revisions or changes unless required to do so by prior
arrangement.
Disclaimer
UNLESS SPECIFICALLY AGREED TO IN WRITING, XANTREX TECHNOLOGY USA INC.:
(
A) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR
OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION;
(
B) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES,
WHETHER SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT
OF THE USE OF SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE
USER’S RISK; AND
(
C) REMINDS YOU THAT IF THIS MANUAL IS IN ANY LANGUAGE OTHER THAN ENGLISH, ALTHOUGH
STEPS HAVE BEEN TAKEN TO MAINTAIN THE ACCURACY OF THE TRANSLATION, THE ACCURACY
CANNOT BE GUARANTEED. APPROVED XANTREX CONTENT IS CONTAINED WITH THE ENGLISH
LANGUAGE VERSION WHICH IS POSTED AT WWW.XANTREX.COM.
Date and Revision
August 2010 Revision B
Product Number Part Number
851-0451 975-0129-01-01
Contact Information
Telephone: 1 800 670 0707 (toll free North America)
1 408 987 6030 (direct)
Fax: 1 800 994 7828 (toll free North America)
Email: customerservice@xantrex.com
Web: www.xantrex.com
XPower450.book Page ii Tuesday, September 7, 2010 12:39 PM