Xantrex Technology 450 Marine Battery User Manual


 
5
RISK OF DAMAGE TO EQUIPMENT: OUTPUT IS NON-SINUSOIDAL
Some chargers for small nickel-cadmium batteries can be damaged if
connected to the XPower Inverter 450. Do not use the inverter with the
following appliances:
Small battery-operated appliances like rechargeable flashlights, some
rechargeable shavers, and night lights that are plugged directly into an
AC receptacle to recharge.
Battery chargers used in hand power tools. These chargers display a
warning label stating that dangerous voltages are present at the charger
battery terminals.
Do not connect any AC load, which has its neutral conductor connected
to ground, to the XPower 450.
Failure to follow these instructions can damage the unit and/or
damage other equipment.
RISK OF DAMAGE TO THE XPOWER 450 INVERTER
Do not insert foreign objects in the XPower 450 outlets or openings.
Never connect the inverter to power utility AC distribution wiring.
Do not use the XPower 450 in temperatures over 100° F (40° C).
Do not expose the XPower 450 to water, rain, snow, or spray.
Do not connect live AC power to the XPower 450’s AC outlets. The
inverter will be damaged even if it is switched OFF.
Failure to follow these instructions can damage the unit and/or
damage other equipment.
XPower450.book Page 5 Tuesday, September 7, 2010 12:39 PM