Filter
Top Products
12 Freedom SW 2000 Installation Guide
Planning the Installation
Unpacking and Inspecting the Freedom SW 2000 Inverter/Charger
To unpack and inspect:
1. Unpack the unit and check the materials list. If anything is missing
from the shipping box, contact Xantrex Customer Service. See
“Contact Information” on page i.
2. Record the serial number of the Freedom SW 2000 and other purchase
information in the “Warranty and Product Information” section of the
Freedom SW 2000 Sine Wave Inverter/Charger Owner’s Guide. You
will be asked for this product information if you need to call Xantrex
Customer Service.
3. Save your purchase receipt to use as proof-of-purchase. This receipt is
required if the inverter/charger should need warranty service.
4. Save the original shipping carton and packing materials. If the
inverter/charger needs to be returned for service, it should be shipped
in the original carton. Packing the Freedom SW 2000 in the original
shipping carton is also a good way to protect the inverter/charger if it
ever needs to be moved.
HEAVY LOAD
The Freedom SW 2000 Inverter/Charger is heavy (see “Inverter/Charger
Physical Specifications” on page 36)
. The unit is too heavy for one
person to safely lift and mount. Xantrex recommends that two people lift
and mount the unit. Always use proper lifting techniques during
installation to prevent personal injury.
Failure to follow these instructions can result in minor or moderate
injury.
IMPORTANT:
Keep the carton and packing material in case you need to
return the Freedom SW 2000 for servicing.