975-0527-01-01 23
Installing the Inverter/Charger
This guide for use by qualified installers only.
6. Tighten the terminal screws. Leave some slack wire inside the wiring
box.
7. Secure the strain-relief clamp on the AC output cable jacket.
8. Attach the wiring compartment cover panel and tighten the four
screws.
9. Connect the outgoing AC wires to an AC load panel equipped with
circuit breakers.
Table 4
Output AC Wire Size
Wire Size No. 10 AWG
Color Coding L: black:
N: white
G: green