Xantrex Technology Freedom SW 2000 Marine Battery User Manual


 
iv Freedom SW 2000 Installation Guide
Important Safety Instructions
IMPORTANT: READ AND SAVE THIS INSTALLATION GUIDE FOR
FUTURE REFERENCE.
This chapter contains important safety and installation instructions for the
Freedom SW 2000 Inverter/Charger (Freedom SW 2000). Each time,
before using the Freedom SW 2000, READ ALL instructions and
cautionary markings on or provided with the inverter/charger, the batteries,
and all appropriate sections of this guide.
NOTE: The Freedom SW 2000 contains no user-serviceable parts. See
“Warranty and Return Information” on page 65 of the Owner’s Guide for
guidance.
NOTE: Turning off the inverter/charger using the on/off switch on the front
panel will not reduce an electrical shock hazard.
ELECTRICAL SHOCK HAZARD
Do not expose the Freedom SW 2000 to rain, snow, spray, or bilge
water. This inverter/charger is designed for indoor use only.
Do not operate the inverter/charger if it has received a sharp blow,
been dropped, has cracks or openings in the enclosure including if the
fuse cover has been lost, damaged, or will not close, or otherwise
damaged in any other way.
Do not disassemble the inverter/charger. Internal capacitors remain
charged after all power is disconnected.
Disconnect both AC and DC power from the inverter/charger before
attempting any maintenance or cleaning or working on any circuits
connected to the inverter/charger. See note below.
Do not operate the inverter/charger with damaged or substandard
wiring. Make sure that all wiring is in good condition and is not
undersized.
Failure to follow these instructions will result in death or serious
injury.