Filter
Top Products
4–2 975-0467-01-01
Display Panel Operation
The Freedom HW features a display panel with three-digit LED display
screen to show inverter, AC source, and battery status information.
Feature Description
1 Power button
• Press and hold for one second to turn the Freedom HW’s Inverter function ON or OFF
(when AC Shore Power is NOT present.)
• Press and hold for five seconds to go into Feature Setting Mode.
2 Three-digit LED display screen shows status information and fault codes.
3 Status LED – indicates the mode of operation with a three-color LED.
• Green pertains to Utility status.
• Solid indicates the Freedom HW is in shore power mode and battery is fully charged.
• Flashing indicates the Freedom HW is in shore power mode and the unit is currently
charging the battery.
• Yellow pertains to Battery status.
• Solid indicates the Freedom HW is in inverter mode and using the battery to provide
AC power.
• Flashing indicates the Freedom HW is in inverter mode but AC shore power is
detected thus transferring to shore power mode within 20 seconds.
• Red indicates a Fault condition and the Freedom HW has shut down. See
“Troubleshooting Reference” on page 5–8.
4 Select button
• In Invert mode, press the button to choose what appears in the three-digit LED display.
See “Viewing Inverter/Charger Information” on page 3–3.
NOTE: A corresponding LED light either flashes or illuminates solid for each item.
• In Feature setting mode, press to toggle through different selections and press and hold
for five seconds to make the selection permanent. See “Adjusting Feature Settings” on
page 3–3.
FREEDOM
HW 1000
Input Voltage (V)
Select
STATUS
Battery
Fault
Utility
Input Current (A)
Output Power (kW)
4
1
2
3
Info and Settings LED lights