Installation
2 975-0171-01-01
Installation Information
Before You Begin the Installation
Before beginning your installation:
• Read the entire Installation Guide so you can plan the installation from
beginning to end.
•Read the Xanbus System Installation Guide to plan your network
requirements.
• Assemble all the tools and materials you require for the installation.
• Review the Important Safety Instructions on page v.
• Be aware of all safety and electrical codes which must be met.
Installation Codes
Applicable installation codes vary depending on the specific location and
application of the installation. Some examples are:
• The U.S. National Electrical Code (NEC)
• The Canadian Electrical Code (CEC)
• Canadian Standards Association (CSA) and RV Industry Association (RVIA)
for installation in RVs.
WARNING: Electrical shock and fire hazards
Xantrex® recommends all wiring be done by qualified personnel. Disconnect all AC and
DC power sources to prevent accidental shock. Disable and secure all AC and DC
disconnect devices and automatic generator starting devices.
It is the installer’s responsibility to ensure compliance with all applicable installation
codes and regulations.