Xantrex Technology RS3000 Marine Battery User Manual


 
Installation
6 975-0171-01-01
Planning
AC, DC, and Network Components
For a successful installation, you need to plan for AC, DC, and network
components of the power system. The AC and DC components are described in
this section and illustrated in Figure 2 on page 7.
AC components include:
•AC Input
•AC Loads
AC Disconnect and Over-Current Protection Device
Distribution Panels
•AC Wiring
AC Output Neutral Bonding
DC components include:
Batteries
DC Disconnects and Over-Current Devices
DC Cabling
DC Grounding
Network considerations include:
Cables, connectors, network connectors, and terminators for the System
Control Panel and Automatic Generator Start, if installing.
Detailed information on planning and installing your network is available in
the Xanbus System Installation Guide. Refer to the system guide to determine
the type of network layout to install, as well as guidelines for installing the
network. This guide is available for download at www.xantrex.com