Filter
Top Products
Introduction
ZKDU Keyboard Controls
6
P1059693-001 Rev. A ZKDU User’s Guide 6/4/2013
F1 key - Select Printer/ZKDU Language. Prompts the user to change from the selected
programming language to the other programming language (if available in your Zebra
printer):
EPL to ZPL screen
ZPL to EPL screen
F2 key - Print a List of Forms. Pressing the “F2” key will cause the attached printer to
print a list of forms that are stored in the printer. The list contain form names available to
the ZKDU’s selected language mode: EPL or ZPL. See examples below.
ENTER key - Press Enter key accept and send the form name, print count or other form
fill-in data to the printer.
UPPER key - Toggles between Small and Capital letter modes during data input
operations. This only changes white letter keys (and not the white number keys). This key
does not effect data input via the Auxiliary port connected input device.
SHIFT key - Press the SHIFT key and one of the white letter keys to change the letter’s
case (and not the white number keys). This key does not effect data input via the Auxiliary
port connected input device.
Backspace key - Deletes the character displayed to the immediate left of the cursor
prompt (blinking block).
CLEAR key - Clears the data entry (the bottom displayed line) presently being entered.
EXIT key - Cancels present operation and returns the operator to the FORM recall screen.
EPL Forms Printout ZPL Forms Printout