Filter
Top Products
Chapter 16 Remote Management Screens
NWA-3500/NWA-3550 User’s Guide
195
16.8 Technical Reference
This section provides some technical background information about the topics
covered in this chapter.
16.8.1 MIB
Managed devices in an SMNP managed network contain object variables or
managed objects that define each piece of information to be collected about a
User Profile This field is available only when you select SNMPv3 in the SNMP
Version field.
When sending SNMP v3 traps (messages sent independently by the
SNMP agent) the agent must authenticate the SNMP manager. If the
SNMP manager does not provide the correct security details, the
agent does not send the traps.
The NWA has two SNMP version 3 login accounts, User and Admin.
Each account has different security settings. You can use either
account’s security settings for authenticating SNMP traps.
Select User to have the NWA use the User account’s security
settings, or select Admin to have the NWA use the Admin account’s
security settings.
Use the Configure SNNMPv3 User Profile link to set up each
account’s security settings.
Configure
SNMPv3 User
Profile
Click this to go to the SNMPv3 User Profile screen, where you can
configure administration and user login details.
SNMP
Service Port You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Service Access Select the interface(s) through which a computer may access the
NWA using this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to
communicate with the NWA using this service.
Select All to allow any computer to access the NWA using this
service.
Choose Selected to just allow the computer with the IP address that
you specify to access the NWA using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 60 Remote MGNT > SNMP
LABEL DESCRIPTION