Chapter 19 Log Screens
NWA-3500/NWA-3550 User’s Guide
232
19.6 Technical Reference
This section provides some technical background information about the topics
covered in this chapter.
19.6.1 Example Log Messages
This section provides descriptions of some example log messages.
Table 75 System Maintenance Logs
LOG MESSAGE DESCRIPTION
Time calibration is
successful
The NWA has adjusted its time based on information from
the time server.
Time calibration failed The NWA failed to get information from the time server.
DHCP client gets %s A DHCP client got a new IP address from the DHCP server.
DHCP client IP expired A DHCP client's IP address has expired.
DHCP server assigns %s The DHCP server assigned an IP address to a client.
SMT Login Successfully Someone has logged on to the NWA's SMT interface.
SMT Login Fail Someone has failed to log on to the NWA's SMT interface.
WEB Login Successfully Someone has logged on to the NWA's web configurator
interface.
WEB Login Fail Someone has failed to log on to the NWA's web
configurator interface.
TELNET Login
Successfully
Someone has logged on to the NWA via telnet.
TELNET Login Fail Someone has failed to log on to the NWA via telnet.
FTP Login Successfully Someone has logged on to the NWA via FTP.
FTP Login Fail Someone has failed to log on to the NWA via FTP.
Table 76 ICMP Notes
TYPE CODE DESCRIPTION
0 Echo Reply
0 Echo reply message
3 Destination Unreachable
0 Net unreachable
1 Host unreachable
2 Protocol unreachable
3 Port unreachable
4 A packet that needed fragmentation was dropped because it was set to
Don't Fragment (DF)
5 Source route failed
4 Source Quench