Filter
Top Products
Chapter 20 VLAN
NWA-3500/NWA-3550 User’s Guide
239
20.4.1 RADIUS VLAN Screen
Use this screen to configure your RADIUS Virtual LAN setup. Click VLAN >
RADIUS VLAN. The following screen appears.
Figure 144 VLAN > RADIUS VLAN
The following table describes the labels in this screen.
Table 80 VLAN > RADIUS VLAN
LABEL DESCRIPTION
Block station if
RADIUS server
assign VLAN name
error!
Select this to have the NWA forbid access to wireless clients when
the VLAN attributes sent from the RADIUS server do not match a
configured Name field.
When you select this check box, only users with names configured in
this screen can access the network through the NWA.
VLAN Mapping Table Use this table to map names to VLAN IDs so that the RADIUS server
can assign each user or user group a mapped VLAN ID. See your
RADIUS server documentation for more information on configuring
VLAN ID attributes.
See Section 20.5.3 on page 243 for more information.
Select a check box to enable the VLAN mapping profile.
ID Type a VLAN ID. Incoming traffic from the WLAN is authorized and
assigned a VLAN ID before it is sent to the LAN.