41
GENERAL
USER ENGINEERING MODE
(DELUXE Only)
Your treadmill offers a User Engineering Mode that can access certain data
and help to troubleshoot your treadmill. User Engineering Mode is designed
for you to access functions that will not affect important treadmill settings. To
access this mode, please hold down SPEED DOWN and ENTER for five
seconds while the treadmill is in any state of setting up a program. The units
screen will appear when entering user engineering. If the units are correct,
press STOP. To access the data press the SPEED and ELEVATION keys to
scroll through the available data/functions. To select the data/function,
press ENTER. To save data, hold down ENTER until the treadmill beeps. To
exit, press STOP.
UNITS
P6 represents units, English or Metric. You can select this configuration for
your Treadmill.
MI or KM appears in the dot matrix. If it is “MI”, the Treadmill is
configured in English units (miles/mph); “KM” represents a Metric
configuration (kilometers/kph). Press the SPEED arrows to toggle between
English and Metric.
In order to save the modified value, press and hold ENTER. Note that
changing units does affect the stored value of weight and clears any stored
user programs. Changing units may also require you to perform
auto-calibration.
MAX TIME
P7 represents the maximum time, which is displayed in the upper right
window. This is the maximum time the treadmill will display. You can
modify this time by using the number keys or SPEED or ELEVATION arrows.
Press and hold ENTER to save the new value.
DEFAULT WEIGHT
P8 represents default weight. Weight appears in the upper left window.
To modify weight, press the number keys or SPEED arrows. To save the
new default weight, press and hold ENTER prior to exiting. If units type (MI
or KM) is modified immediately prior, weight defaults to 150 lbs. or 68 kg.
