Filter
Top Products
ASUS A7N8X-E Deluxe motherboard
4-13
Access Mode [Auto]
Select the hard disk drive type in this field. When Logical Block Addressing
(LBA) is enabled, the 28-bit addressing of the hard drive is used without
regard for cylinders, heads, or sectors. Note that LBA Mode is necessary for
drives with more than 504MB storage capacity. Select [CHS] to make manual
entries for configuring the fields below. Configuration options: [CHS] [LBA]
[Large] [Auto]
Cylinders
This field configures the number of cylinders. Refer to the drive documentation
to determine the correct value. To make changes to this field, set the IDE
Primary Master field to [Manual] and the Access Mode to [CHS].
Head
This field configures the number of read/write heads. Refer to the drive
documentation to determine the correct value. To make changes to this
field, set the IDE Primary Master field to [Manual] and the Access Mode to
[CHS].
Precomp
This field displays the precompressed volumes on the hard disk, if any, in
MB.
Landing Zone
This field displays the drive’s maximum useable capacity as calculated by
the BIOS based on the drive information you entered.
Sector
This field configures the number of sectors per track. Refer to the drive
documentation to determine the correct value. To make changes to this field,
set the Type field to [User Type HDD] and the Translation Method field to
[Manual].