Filter
Top Products
Programming Procedures
System Date
Code:
#101
If your system has been previ-
Description:
The month, day, and year that appears on PARTNER display
ously programmed, the displays
phones
may differ.
Valid Entries: Any date
Programming Steps:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 0 ] [ 1 ] .
display reads:
System Date
Data 010100
2. Enter today’s date in the form MMDDYY, using leading zeroes for all
single-digit months and dates. For example, to enter December 4, 1990,
press [ 1 ] [ 2 ] [ 0 ] [ 4 ] [ 9 ] [ 0 ] . The display reads:
See the box at the bottom of this
page for a summary of options of
what to do next.
System Day
System Date
Data 120490
Code: #102
Description:
The day of the week that appears on PARTNER display phones
Valid Entries: ✓ 1
=
Sunday
4 = Wednesday 6 = Friday
2 = Monday 5 = Thursday
7 = Saturday
3 = Tuesday
Programmi
ng Steps:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 0 ] [ 2 ]
.
display reads:
System Day
1 Sun
2. Change the day by entering a new setting number as listed above.
example, to set the day to Tuesday, press [ 3 ]
.
The display reads:
System Day
3 Tue
For
Or press [ Next Data ] or [ Prev Data ] until the correct day of the week shows on the
display.
✓
= Factory Setting
Togo to the next procedure: [ Next Proc ]
To go to a specific procedure: [ # ] [ X ] [ X ] [ X ]
Togo to the previous procedure: [ Prev Proc ]
(where X X X is the procedure number)
To return data to the factory setting: [ Remove ]
To exit system programming: [ Feature ] [ 0 ] [ 0 ]
3-4 System Programming