AT&T MLS-12TM Marine Radio User Manual


 
Emergency
Code:
#406
Phone Number
Description:
Specifies emergency telephone numbers, such as “911,” that can
List
be dialed from any extension regardless of other dialing restrictions, except Line
Use Restriction (#302).
See appendix B for a summary of
dialing restrictions.
Valid Entries:
10 telephone numbers, 1 to 12 digits each
Programming Notes: The emergency list can contain specific telephone
numbers or categories of telephone numbers. See Disallowed Phone Number
Lists (#404) for detailed instructions on programming telephone numbers.
IMPORTANT:
When programming emergency numbers and/or making test
calls to emergency numbers:
1. Remain on the line and briefly explain to the dispatcher the reason for the
call before hanging up.
2. Perform such activities in the off-peak hours, such as early morning or late
evening.
Programming Steps:
Typical list entries include:
1.
411 (local information)
611 (Iocal phone company repair)
911 (emergency services)
Boss’s home phone number
2.
3.
Press [ Feature
] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 6 ] . The
display reads:
EmergencyList
Entry:
Select a list entry (01 through 10). For example, to select entry 03, press
[ 0 ] [ 3 ] . The display reads:
EmergencyList 03
Data------------
Enter the telephone number. For example, to allow local directory service
dialing, press [ 4 ] [ 1 ] [ 1 ] [ Enter ]. The display reads:
EmergencyList 03
Data411
To select another list entry, press [ Next Item ] or [ Prev Item ] until the new entry number shows
on the display. Repeat step 3.
To correct an incorrect telephone number, press [ Remove
] and enter the correct phone
number.
To delete a telephone number, press [ Remove
].
= Factory Setting
To go to the next procedure: [ Next Prov ]
To go to a specific procedure: [ # ] [ x ] [ x ] [ x ]
To go to the previous procedure: [ Prev Proc ]
(where XXX is the procedure number)
To return data to the factory setting: [ Remove ]
To exit system programming: [ Feature ] [ 0 ] [ 0 ]
System Programming 3-23