Filter
Top Products
Programming Steps:
1.
Press [ Feature ] [
0
] [ 0 ] . The display reads:
PROGRAM EXT 10
2. Enter the 2-digit code you want to assign the phone number by pressing
[ Feature ] and 2 digits between 20 and 79. For example, to assign code 20,
press [ Feature ] [ 2 ] [ 0 ] . If a number is already assigned to the code, it
appears in the display. If no number is assigned to the code, the display
reads:
Blank
3. Enter the phone number. For example, to program 555-4757 to code 20,
press [ 5 ] [ 5 ] [ 5 ] [ 4 ] [ 7 ] [ 5 ] [ 7 ] . The display reads:
5554757
To mark the speed dial number, precede the number by *. For example,
to mark the number 555-1001, enter [ * ] [ 5 ] [ 5 ] [ 5 ] [ 1 ] [ 0 ] [ 0 ] [ 1 ]. The
display reads:
*5551001
To include special functions in the phone number, see table 3-1 on
p. 3-36.
To program another System Speed Dial number, start from step 2.
To program over an existing number, enter the new number after selecting the 2-digit
code.
To remove a System Speed Dial number, enter the number’s 2-digit code and press
[ Mic ] once.
To exit the program mode at any time, press [ Feature
] [ 0 ] [ 0 ] .
System Programming 3-35