Filter
Top Products
Loudspeaker
Description:
If the system has a loudspeaker paging system, this feature
Paging
activates it. By programming this feature on a button, the user can activate the
loudspeaker with one touch.
Programming Steps:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ]. The
display reads:
CENTRAL TEL PROG
Extension:
2. Enter the extension to be programmed. For example, to program exten-
sion 28, press [ 2 ] [ 8 ] . The display reads:
PROGRAM EXT 28
3. Select a button to program by pressing any programmable button.
4.
Press the left
[ Intercom ]
button, followed by
[ 7 ] [ 0 ]
. The display reads:
Loudspeaker Page
To program another feature on this extension, go to step 3 for that feature.
Calling Group
Description:
Enables the user to simultaneously call all the extensions in the
Calling Group. By programming this feature on a button, the user can call the
group with one touch. The Calling Group is assigned through system program-
ming procedure #502.
Programming Steps:
1.
2.
3.
4.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ]. The
display reads:
CENTRAL TEL PROG
Extension:
Enter the extension to be programmed. For example, to program exten-
sion 14, press [ 1 ] [ 4 ] . The display reads:
PROGRAM EXT 14
Select a button to program by pressing any programmable button.
Press the left [ Intercom ] button, followed by [ 7 ] [ 1 ] . The display reads:
Calling Group
To program another feature on this extension, go to step 3 for that feature.
To erase a button setting, press the button to be erased and [ Mic ].
To program another extension, press [ Central Tel Prog ] and continue from step 2.
To go to system programming mode, press [ Central Tel Prog
] [ System Program ].
To exit centralized telephone , press [ Feature
] [ 0 ] [ 0 ] .
Centralized Telephone Programming 4-13