Filter
Top Products
Specifications & Product Data 8-3MN1853
Dimensions
6.00
(152.4)
0.20 (5.1)
0.34 (8.7)
5.44
(138.1)
1.27 (32.2)
2.54
(64.4)
5.92
(150.4)
0.21 (5.3)
1 Axis
Driver
Use 8–32 or 10–32 Cap Screws (2 places)
6.30
(160.0)
For safe operation, allow a clearance distance between each control and on all sides of each control.
For safe operation, allow a clearance distance between each control and on all sides of each control.
At least 3 inches (75mm) top and bottom clearance must be provided for air flow. Between drivers
(each side), allow at least 0.1 inch (2.5mm).