Filter
Top Products
Introduction
Nothing Comes Close to a Cobra
®
Product Features
69
Digital Select Calling (DSC)
Operation
Sending an Individual Call
Use the DSC Individual call feature to request
communication with one (1) exclusive station. The DSC
Individual call does not alert all other stations within range.
To Send an Individual Call:
1. In Standby mode, select a channel to communicate a call.
2. Press the Call/Setup button to enter the Call Setup
menu.
3. Press the Enter button to enter to the INDIV select
Directory.
4. Scroll to Select from Routine, Urgency or Safety as the
type of call to send.
5. Press Enter button to advance to Directory or Manual
selection. Scroll to select either method to send call.
Press Enter button again.
6. Turn the Channel knob or press the Channel Preset
buttons to select a name to call from the directory.
7. Press the Enter button to send the message or return to
Standby mode if EXIT was chosen.
■
If the radio called sends back an automatic DSC
response “able to comply,” the individual alarm will
sound. Wait for a voice message from the called
station.
■
If the radio called does not send an “able to comply”
response, the radio waits eight seconds and resends
the message.
■
If an “unable to comply” response or no reply is
received, the radio display asks to resend the message
or exit the menu.
At the Unavailable menu, select SEND or EXIT with the
Enter button.
■
If SEND is selected, the radio restarts the individual call.
■
If EXIT is selected, the individual location on the Call
menu displays.
Operating Your Radio
INDV DIR Menu
Individual Directory
Select Name
Send/Exit
Individual Waiting
Call Type
Menu Select
8187-F80-Operation-8_MMB:F75-Operation-8 12/29/06 9:04 AM Page 69